ble central repeat read and write to three peripherals error USAGE FAULT #ble


Currently I can connect one central to three peripherals
After the connection is established, the corresponding uuid and handle are also found
I use these two functions to read/write
bt_gatt_write(bt_conn_lookup_index(conn_index), &write_params);
bt_gatt_read(bt_conn_lookup_index(conn_index), &read_params);
conn_idex is the value I entered by myself, it seems I want to connect to the number (if I want to write/read to three peripherals in sequence, fill in 0,1,2 in sequence)

But when central sent read/write to peripheral and ran for one round, the following error occurred when it was about to run the second round
[00:00:06.042,266] os: ***** USAGE FAULT *****
[00:00:06.042,297] os: Illegal use of the EPSR
[00:00:06.042,297] os: r0/a1: 0x20000218 r1/a2: 0x00000001 r2/a3: 0x200016fc
[00:00:06.042,297] os: r3/a4: 0x00000000 r12/ip: 0x0000cfe9 r14/lr: 0x0000de87
[00:00:06.042,297] os: xpsr: 0x20000000
[00:00:06.042,297] os: Faulting instruction address (r15/pc): 0x00000000
[00:00:06.042,327] os: >>> ZEPHYR FATAL ERROR 0: CPU exception on CPU 0
[00:00:06.042,327] os: Current thread: 0x200013f0 (unknown)
[00:00:06.780,883] os: Halting system
How can I remove this error?
Is there a problem with the bt_conn_lookup_index I quoted in bt_gatt_write/read?
What to do to make one central communicate with multiple peripherals?


  • Zephyr 2.4.0
  • zephyr-sdk-0.11.3
  • nrf52840

Join to automatically receive all group messages.