Hi Aaron,

This may help you,

http://docs.zephyrproject.org/samples/boards/nrf52/mesh/onoff-app/README.html

You could provision your node based on above example using either #meshctl utility from BlueZ 5.49 or Silicon Labs #BluetoothMesh Android App.

Regards,

vikrant

On Tue, Apr 17, 2018, 1:46 PM Aaron Xu <overheat1984@...> wrote:

Hi,

I follow the "Eclipse debugging" instructions, which can be found here:

http://docs.zephyrproject.org/application/application.html#eclipse-debugging

And I tried some bluetooth samples in zephyr on NORDIC pca10040 board, like Beacon, mesh demo, they are works.

But those message keep printing on my terminal(serial), when I try the "zephyr\samples\bluetooth\mesh"

***** Booting Zephyr OS v1.11.0-710-g09a8810b3 *****

Initializing...

[bt] [INF] hci_vs_init: HW Platform: Nordic Semiconductor (0x0002)

[bt] [INF] hci_vs_init: HW Variant: nRF52x (0x0002)

[bt] [INF] hci_vs_init: Firmware: Standard Bluetooth controller (0x00) Version 1.11 Build 99

[bt] [INF] show_dev_info: Identity: ee:ef:34:8d:7f:97 (random)

[bt] [INF] show_dev_info: HCI: version 5.0 (0x09) revision 0x0000, manufacturer 0x05f1

[bt] [INF] show_dev_info: LMP: version 5.0 (0x09) subver 0xffff

Bluetooth initialized

[bt] [INF] bt_mesh_prov_init: Device UUID: 00000000-0000-0000-0000-00000000dddd

Mesh initialized

adv stack (real size 812):      unused 516      usage 296 / 812 (36 %)

Kernel stacks:

main      (real size 512):      unused 276      usage 236 / 512 (46 %)

idle      (real size 320):      unused 272      usage 48 / 320 (15 %)

interrupt (real size 2048):     unused 1648     usage 400 / 2048 (19 %)

workqueue (real size 2048):     unused 1736     usage 312 / 2048 (15 %)

ecc stack (real size 1324):     unused 448      usage 876 / 1324 (66 %)

prio recv thread stack (real size 748): unused 632      usage 116 / 748 (15 %)

recv thread stack (real size 2348):     unused 2136     usage 212 / 2348 (9 %)

adv stack (real size 812):      unused 472      usage 340 / 812 (41 %)

Kernel stacks:

...

Kernel stacks:

...

 

I can see those printf information in the red, look it works. but what's the next coming information?

What should I do next? flash more then one board?

Please give me some advise or a documentation, I will appreciate it! 

Regards,

Aaron