Hi I wanted to check if there is a way to use cryptographic cipher suites without including following config options. CONFIG_MBEDTLS=y CONFIG_MBEDTLS_BUILTIN=y

Hi, I'm trying to force a nRF52840-pca10056 DK to scan for BLE advertisements with PHY set to CODED via HCI and BlueZ 5.50 but keep getting rejected by the hci_uart from Zephyr examples (master

Dear Group, our device based on BL652 / nRF52832 silently stops advertising. After a reboot, everything works perfectly, but after some hours, it will just stop to be visible for other devices.

*Root directory = project folder -- Rodrigo Peixoto Co-founder and Technical guru +55 (82) 98144-8585 http://ayna.tech | Skype: rodrigopex .

Josef, The BOARD_ROOT works for me even with Stm32 boards. The pinmux is mandatory for alternate functions on st boards. You can run the following commad to set the board root: west build -b

Hi Lawrence, I rewrote the “Programming and Debugging” sections for all the NXP boards in a PR that was just merged on Friday: https://github.com/zephyrproject-rtos/zephyr/pull/14000 For

Hi Lawrence, I've been trough that too. It seems that two things are missing on your side. First, you need to install the J-Link tools on your development host. Secondly, you should swap the

Hi everyone, I am not able to get ssd1306 working with zephyr. i am trying with nrf52840. The same setup works with adafruit library but not with zephyr. I am using I2C and get ACKs for all the data

Update: CAN bus is working now with my board. I had to move by board config into the Zephyr tree, then pinmuxing seems to work. I still do not know the root cause. My configuration (for CAN) was

Hi, the driver is built into the kernel, but what I found out yesterday is, that the pinmuxing is not set up correctly. And the STM32 CAN controller will wait until it has received some bits before

Hello Am trying to run the hello_world sample project with code modified to cause a buffer overflow (it's for a course project!). However, instead of the EIP register being written into by the the

Dear All On my business trip last week I was handed a i.MX RT1064 board, so today I tried to build and install the blinky progam for it. Unfortunately I am having problem getting Ninja flash or

Hi Josef To me, the problem look more like you didn’t include the CAN bus drivers when you built the kernel. Try running ‘make menuconfig’ and turning on the CAN bus, then rebuilding.

Hello, I just started working on a new project and giving zephyr a try. I have came to a problem that I can't seem to easily root cause. I'm using nRF52832 with BLE running and also running a

Hi Joseph, Which board are you using? Did you check that CAN driver is available for this board? Not sure it has been deployed for the whole STM32 family. Erwan

With some more debugging it looks like the STM32 CAN initialization fails in the STM32 HAL code: At HAL_CAN_Init() the loop waiting for the INAK bit in the CAN_MSR register to be reset when the

Hi all, We have just tagged Zephyr 1.14.0-rc3. At this point ONLY PRs related to docs or related to a GitHub issue / bug will go in. If a PR fixes a bug it MUST have an associated GitHub

Hey, I have a question about date and time generation in ZephyrOS. Current I am building a demo in which I am receiving samples. Now I like to add a timestamp to them. How can I do this in ZephyrOS?

Hi, I am trying to get the STM32 CAN bus driver running with the latest revision from git. Unfortunately calling device_get_binding() fails and the reason for that is that the pointer 'driver_api' in

Hi Maureen, Thanks for helping me! I use irq_lock() and irq_unlock() over the write/erase code section to avoid this. Antoine