users@lists.zephyrproject.org

Zephyr BLE - use public(fixed) address

Hello, Can Zephyr allow us to use the HW MAC address of the BLE module while advertising? I am working on the BLE sample codes in Zephyr 1.6, and noticed that while running the Zephyr BLE

By Purushothaman, Neha <neha.purushothaman@...> · #31 ·

Re: Can not get any call back when bluetooth connect fail

Hi Johan, Oh, I forgot to answer a question in the previous mail. --Is this the same issue you've outlined here: https://jira.zephyrproject.org/browse/ZEP-2005 Yes, it is the same issue.

By ghost <hfggw@...> · #30 ·

Re: Can not get any call back when bluetooth connect fail

Hi Johan, Thanks for your reply, I fail to add your batch by "git apply conn-timeout.patch", I add the modification manually, but the issue still doesn't fix. What I found is that when the issue

By ghost <hfggw@...> · #29 ·

Re: Can not get any call back when bluetooth connect fail

Hi guiwu gue, Is this the same issue you've outlined here: https://jira.zephyrproject.org/browse/ZEP-2005 If so, does the attached patch help? Johan

By Johan Hedberg · #28 ·

Can not get any call back when bluetooth connect fail

Hi all, I am use bluetooth function in NRF52_PCA10040 board, I get a issue that when a central get a connect fail after I call bt_conn_create_le function, it didn’t get any call back. I do know

By ghost <hfggw@...> · #27 ·

Re: How to write a string to serial?

Thanks all, I have solve the problem by using: for(;;) { printk("Hello World\n"); } But those were all garbled on the minicom. How about yours? How yours see the debug information

By kk <pinganddu90@...> · #26 ·

Re: How to write a string to serial?

You can try changing the serial connections. Green -> RX White -> TX Black -> GND

By Qiu, PeiyangX <peiyangx.qiu@...> · #25 ·

Re: How to write a string to serial?

My def_config was arduino_101_defconfig.

By kk <pinganddu90@...> · #24 ·

Re: How to write a string to serial?

Hi Feilpe I found the "task_sleep()" function in legacy.h, When I add the "task_sleep(500)" and the include file legacy.h, the compiler tell: undefined reference to `_legacy_sleep' I am

By kk <pinganddu90@...> · #23 ·

Re: How to write a string to serial?

Hi, depending on where the message is placed, you will not see it on console. if I remember the hw example in zephyr was implemented on whis way: void main(void) { printf("Hello_x86!

By Felipe Neves · #22 ·

Re: How to write a string to serial?

Hi Kumar That not works Thanks

By kk <pinganddu90@...> · #21 ·

Re: How to write a string to serial?

If you just use printf() you will get strings outputted to serial with most default configurations. - k

By Kumar Gala · #20 ·

How to write a string to serial?

Hi all I am new to this mailing list. I connect my arduino 101 to minicom, I have set the serial port: ttyUSB0 8N1 I use the Adafruit 4 pin cable (PL2303) black Ground connect GND on arduino

By kk <pinganddu90@...> · #19 ·

How to write a string to serial?

Hi all I am new to this mailing list. I connect my arduino 101 to minicom, I have set the serial port: ttyUSB0 8N1 I use the Adafruit 4 pin cable (PL2303) black Ground connect GND on arduino

By kk <pinganddu90@...> · #18 ·

Zephyr GDB python scripts?

Hi there! I'm new to Zephyr. I was looking for gdb python scripts that add commands/shortcuts to gdb to do helpful things like dump memory pool blocks, print out status of sync primitives, etc. Does

By The, Martijn <martijn.the@...> · #17 ·

Re: Build of samples/hello_world for Arduino 101 fails with SDK v0.9 works with SDK v0.8.2

It’s an openocd path issue. SDK0.9 is using x86_64, not i686. Please try to add the following lines to .zephyrrc if you are using it. export

By Qiu, PeiyangX <peiyangx.qiu@...> · #16 ·

Re: Build of samples/hello_world for Arduino 101 fails with SDK v0.9 works with SDK v0.8.2

Looks like you are still using the 0.8.2 SDK? Seems like something isn’t right with your zephyr-sdk-0.9 install. What do you get for: ls

By Nashif, Anas · #15 ·

Re: Build of samples/hello_world for Arduino 101 fails with SDK v0.9 works with SDK v0.8.2

Seems like something isn’t right with your zephyr-sdk-0.9 install. What do you get for: ls /home/alexm/swdev/zephyr-sdk-0.9/sysroots/i686-pokysdk-linux/usr/bin/iamcu-poky-elfiamcu - k

By Kumar Gala · #14 ·

Build of samples/hello_world for Arduino 101 fails with SDK v0.9 works with SDK v0.8.2

I was testing out building the v1.6.0 kernel using SDK v0.9 for BOARD=arduino_101 and it failed. I was able to build it using the SDK v0.8.2, but it failed to flash via openOCD. I´m using Ubuntu

By Alex Molina · #13 ·

Re: Intel Pattern Matching in Zephyr?

Hi Vinay, thanks for the very useful information, I'll take a look on the supplied link :) A question to you, did you use the intel QMSI software package as interface between physical registers and

By Felipe Neves · #12 ·

Messages