Hi Mithun, Seeing this: File "C:\Users\username\zephyrproject\zephyr\scripts/west_commands\runners\openocd.py", line 114, in do_run self.require(self.openocd_cmd[0]) It seems that west is

HI, I am following the setup steps in given in https://docs.zephyrproject.org/latest/getting_started/index.html Using a Python (3.6) Virtual environment. I was able to build the Blinky example,

Relatively new Zephyr user here. We have a custom board with a LIS2DS12 IMU on it. I've been somewhat ignoring it up to now as it serves a secondary function and we sort of just threw it on there

Hi guys, I am using Zephyr on the Hexiwear Board. I accomplished to use the hearrate sensor and some other sensors on the board. But I am still having trouble with the integrated Display (SSD1351

Thanks Armand, I think I‘ve got that working, now, and referenced properly in the CMakeList. A devicetree binding somewhere requires a couple pin definitions, but I can handle that. I did

Hi Jason, You have to enable the peripheral in the board devicetree overlay (see below). &i2s0 { status = "okay"; }; Armand

Hi, I’m a complete newcomer to zephyr and devicetree, and I’m running into some trouble trying to enable the I2S peripheral on the nRF5340dk board. I’ve enabled both the I2S driver

We have created a custom nRF9160 board which arrived in Las Vegas which I debug by Teams. The hardware engineer has the same version of Nordic nRF Connect SDK v1.51 (SES) as on my computer. We both

They are used interchangeably. Its unfortunate we haven’t cleaned up platform to be board. Fixtures are different from what is listed in ’supported’ in the board YAML. The board YAML is meant

Hello, I am trying to get a better understanding of Zephyr's testing framework. I have read the documentation, but I still have two questions: 1. Is there a meaniningful difference between the

Hi, I use a CDC_ACM serial port with Zephyr (from git), and using IRQ driven. Here is my ISR: static void usb_serial_irq(const struct device *usb_dev, void *user_data) { while

No one ? :/ João Costa <joaocostalapin@...> escreveu no dia quarta, 16/06/2021 à(s) 17:21:

Hi, I need to access STM32's general purpose timer's quadrature decoding functionality. I'm trying to understand what exactly is needed to expose this, either write a custom driver accessing

Hello, In [1], and not only, it is mentioned that cyclictest was used with zephyr. However, I cannot find any specific documentation regarding this combination (zephyr + cyclictest). Could anyone

Hi Kevin, Thanks for reporting this. Would you mind creating a github issue ? We'll investigate the point BR Erwan

I would like to move a BLE project from Zephyr 2.5.0 to 2.6.0. The st_ble_sensor sample included in the Zephyr 2.5.0 tree compiles and runs successfully with the nucleo_wb55rg eval board, but does not

Hi Jacob, > I'm trying to enable the shell subsystem over the uart console on my board with no luck. It seems to be a problem in the board/test config for the ARC hsdk board. Watson is looking

One topic I think would be good to take on is: https://github.com/zephyrproject-rtos/crosstool-ng-old/issues/25 - k

Hi all, During a BoF session at this year's Developer Summit, several of us felt the need to kick off a temporary working group focused on the Developer Experience of Zephyr. Topics that spurred the

Hi, I'm considering adding support for a touchscreen sensor (CST816, used in PineTime) and I would like to use LVGL as well. Right now LVGL expects touchscreen sensor to be exposed via KSCAN