users@lists.zephyrproject.org

How to access external PSRAM via FSMC on STM32H753ZI

Hello, I ‘am currently working on a project, where an extern device (FPGA) is connected to a STM32H753ZI via a multiplexed FSMC interface. After some investigation I managed to setup my device

By Weiberg, Bernd · #3067 ·

external library building with cmake

hello, i am new to zephyr and i am looking into application development. I am trying to build an external library that is normally built with CMake. I have tried to use the external_lib

By antonisk · #3066 ·

Re: Using Echo_Server/Client samples with Openthread on Renode #networking

Hi Robert Thank you for your response. Those 2 configurations you suggested eliminated the errors I was receiving :) For some reason now, Renode gets stuck in an endless loop (echo_server): <dbg> [D]

By Brenton Chetty · #3065 ·

Re: Question about testing target

Hi Dave, The ztest framework is platform agnostic, so you can use it to build a Zephy image that then runs on Qemu, native_posix or on target hardware. There is also a Unit Testing framework

By Carles Cufi · #3064 ·

Re: [Zephyr-devel] Zephyr Project: Contact Inquiry

Hi there, To my knowledge OpenCV does not support Zephyr. Looking at their ports folder it seems like they target full-blown operating systems, and not smaller RTOS like Zephyr:

By Carles Cufi · #3063 ·

Re: Zephyr Project: Contact Inquiry

Hi All, Kindly let us know your input.

By Selvakumar M <Selvakumar.M1@...> · #3062 ·

Re: Using Echo_Server/Client samples with Openthread on Renode #networking

Hi Brenton, Unfortunately I don’t have experience with that platform, but such an error could indicate some problem with the underlying settings backend. By default we enable NVS settings for

By Lubos, Robert · #3061 ·

Question about testing target

Sorry if this is a newbies question... Backround: We normally do most development, testing, and regression testing on PC, not target. This is efficient given most of our issues

By Dave Nadler · #3060 ·

Re: Zephyr Project: Contact Inquiry

Hi Team, Please let us know that OpenCV support on Zephyr, Still I did not get the answer for this.

By Selvakumar M <Selvakumar.M1@...> · #3059 ·

Zephyr SDK 0.15.0 Release

Hi, Zephyr SDK 0.15.0 has been released. https://github.com/zephyrproject-rtos/sdk-ng/releases/tag/v0.15.0 In this release, the GNU toolchain version has been updated: * Updated to Binutils 2.38

By Stephanos Ioannidis · #3058 ·

How to integrate Zephyr Test Framework (Ztest).

Hi, I use nrf sdk 1.9.1. I saw this documentation and want to understand how integrate it to my project of sdk 1.9.1? I use VS Code. 1. Should i create a new project? 2. what is the difference

By Maxim Shmalovsky <maxim.shmalovsky@...> · #3057 ·

Problem with zephyr os

Hi, I'm a beginner in zephyr and i've tried to start with the started guide of zephyr os. I followed it step by step and everything is fine but in the end when i tried to flashing the sample by the

By Mahmoud Aloulou <alouloumahmoud57@...> · #3056 ·

Re: Zephyr Project: Contact Inquiry

Thank you Brett. Team, Please let us knowOpenCV library support in Zephyr RTOS. Regards, Selvakumar

By Selvakumar M <Selvakumar.M1@...> · #3055 ·

Re: k_uptime_get/k_uptime_delta on 32-bit devices

If I understand your question correctly, the answer actually depends on your toolchain. With GCC, you might be looking for the "aligned" attribute, see

By chrisduf · #3054 ·

Re: k_uptime_get/k_uptime_delta on 32-bit devices

How do you make sure that a int64_t is 8-byte aligned?

By yshragai.firmware@... · #3053 ·

Disable image verification during flash #flash

As the title says, i'm looking for a way to disable image verification during its flash. Currently the board i'm using requires bossac, but maybe there is a KCONFIG option that disables it in general.

By lucatorresetti@... · #3052 ·

Re: k_uptime_get/k_uptime_delta on 32-bit devices

I remember something like this happening to me a long time ago, and the reason was that the datatype was not aligned to a 64bit boundary. Could you try capturing the result in a int64_t that is

By Manu R · #3051 ·

Re: k_uptime_get/k_uptime_delta on 32-bit devices

This is definitely supposed to be working. Your second note seems to rule out my first guess (word size mistake in the printf format). Can you submit a bug in github (I'm "andyross" there)

By Andy Ross · #3050 ·

k_uptime_get/k_uptime_delta on 32-bit devices

Hi, I want to use k_uptime_get and k_uptime_delta. These are defined as having return type int64_t, and k_uptime_delta expects an argument of type *int64_t. However, it seems that there is garbage in

By yshragai.firmware@... · #3049 · Edited

Using Echo_Server/Client samples with Openthread on Renode #networking

Hi, I have recently started experimenting with Renode, and when I run the "echo_server" sample with "overlay-ot.conf", I get the following errors: "<err> net_otPlat_settings: Failed to store setting

By Brenton Chetty · #3048 ·

Messages