users@lists.zephyrproject.org

Re: mcuboot restart

Hi, Since your question is specific to the nRF Connect SDK, I would recommend that you raise your issue on the Nordc DevZone or ask your question in the #nordic channel on Zephyr's Discord instance.

By Bolivar, Marti · #3128 ·

mcuboot restart

By mexcoindia@... · #3127 · Edited

Generate 2 images in CMake

Hello, I have a project with thousands of files, assume one of those files is version.cpp, defining variable with version. I want to generate 2 HEX images where the only difference will be

By kvz5544@... · #3126 ·

Zephyr SDK 0.15.2 Release

Hi, Zephyr SDK 0.15.2 has been released. https://github.com/zephyrproject-rtos/sdk-ng/releases/tag/v0.15.2 The following changes have been made in this release: - general: * Fixed "ERROR:

By Stephanos Ioannidis · #3125 ·

Re: GSM-PPP on main and on version v3.2.0 question #modem

Hi, It’s likely related to https://github.com/zephyrproject-rtos/zephyr/issues/52139, we’re reverting the changes that introduced the regression

By Lubos, Robert · #3124 ·

GSM-PPP on main and on version v3.2.0 question #modem

Hi all, I have a board with a STM32L04 microcontroller and a SIM7600 evaluation board. The gsm-ppp driver works fine in a zephyr branch from 23 September but is not working with latest main code. with

By Federico GC · #3123 ·

Using heap listener with default system heap

How can the heap listener be used with the system heap, that is the k_malloc() and k_free() functions? It would seem from the documentation that this is possible using HEAP_ID_LIBC. I took the

By W Kicinski · #3122 ·

Re: Zephyr I2C question

Do you have the defines in the prj.conf file? # I2c for 24LC512 CONFIG_I2C=y CONFIG_I2C_NRFX=y CONFIG_I2C_LOG_LEVEL_OFF=y David Kaplan Software | AMI Reply EMAIL Address dkaplan@... SKYPE Account:

By David Kaplan · #3121 ·

Zephyr I2C question

Hi, I'm trying to run some sensors using I2C with the nRF52840-DK. So I used the https://docs.zephyrproject.org/latest/develop/getting_started/index.html to install zephyr but is see that the I2C

By Daniel Saber Tehrani <dsaber@...> · #3120 ·

GSM-PPP and ESP32-AT WiFi

Hi all, I'm a jr zephyr developer and I'm trying to make work two different modems in my dev board; 1- SIM7600 Modem using the gsm-ppp driver (UART1) 2- ESP32-WROOM using the espressif,esp32-at driver

By Federico GC · #3119 ·

GSM MUX public API? #driver #modem #ppp

Hi there, I'm using a Quectel EC21 with the GSM PPP driver. This works well so far. Now I would like to use SMS messaging and GNSS additionally. GSM MUX seems to be a good feature therefor. But I am

By slide333333@... · #3118 ·

Re: On race conditions when using k_thread_suspend and k_thread_resume

Zephyr kernel events might be helpful in this case. A thread can wait on one or more events and reset/clear specific ones as well. See the following link for more details.

By Mitsis, Peter · #3117 ·

Re: On race conditions when using k_thread_suspend and k_thread_resume

lists.zephyrproject.org wrote: Probably the easiest solution is to use semaphore with K_FOREVER take timeout. Declare a semaphore, e.g. K_SEM_DEFINE(my_sem, 0, 1); then instead of suspending the

By Moń, Tomasz · #3116 ·

On race conditions when using k_thread_suspend and k_thread_resume

Hi fellow Zephyr users. I am trying to have a thread go to sleep until either: A) A Counter alarm fires B) Another ISR wants to asynchronously wake it up. This could be implemented something like

By Erling Rennemo Jellum <erling.r.jellum@...> · #3115 ·

murata boards support

Hi team, Do we have zephyr support for murata WIFI/BLE module ? chip setCYW43439. Regards, Vinay S L&T Technology Services Ltd www.LTTS.com L&T

By Vinay S · #3114 ·

Re: Active scanning failed to start (err -134)

Hi Alok, I suspect the reason might be that you’re not explicitly setting the param.timeout field, so it’s left uninitialized and potentially containing a non-zero value (which causes the

By Johan Hedberg · #3113 ·

Active scanning failed to start (err -134)

Hi, I am trying to start active scanning, however I do want the duplicates. For this i am giving "BT_LE_SCAN_OPT_NONE" option in parameters to the `bt_le_scan_start`. This however is resulting in

By Alok Sethi <alok.sethi1@...> · #3112 ·

Re: [Zephyr-devel] Add ESP WROOM-32 DEV board to Zephyr RTOS

Hi there, We have a board porting guide that you can use as a starting point to work on adding support for this board: https://docs.zephyrproject.org/latest/hardware/porting/board_porting.html

By Carles Cufi · #3111 ·

Add ESP WROOM-32 DEV board to Zephyr RTOS

Hi, This is Ananya KC from Urbanmorph. We are using ZephyrRTOS to program the ESP WROOM-32 board. Under the supported boards in ZephyrRTOS, XTENSA board - ESP WROOM-32 is not supported. It is a 38

By Ananya KC <ananya@...> · #3110 ·

Re: build zephyr OS in ASIC without user mode

Thanks a lot for your reminding. I will check this and give the feedback. BR//Jinnan

By Jinnan Li A <jinnan.a.li@...> · #3109 ·

Messages