Hello, I am using an STM32H743ZI and have been trying to get PWM output on timers3. I have been able to successfully obtain output for all of the pins/channels I require on timers2, and tim3_ch1_pc6

I've been able to program and run, but not with JLink OpenSDA debug probe. Instead I had to use the DAP Link firmware for QSPI instead ("west flash" unfortunately doesn't work with this so I'd prefer

Hi All, I'm trying to flash code, and boot out of the QSPI memory on the MIMXRT1050 EVKB board. Does anyone have experience with this? I've been unable to successfully flash so far. Here are the steps

New here just stumbled on Zephyr. I come from a PIC background and moved to STM32, loved it.... except the HAL framework... I like how everything is integrated in Zephyr and how easy it is to put

Hi Do you have verification? The executable files I compiled with cypress official software have logs. It is work well. Thx Jason Chen From: Gerson Fernando Budke

Hi Jason, At last part of chapter Board Revision at https://github.com/zephyrproject-rtos/zephyr/blob/main/boards/arm/cy8ckit_062_ble/doc/index.rst I mentioned that "The most complex part is short

Hi Thank you for replying. Actually, I also ran cy8ckit_062_ble_m0 boards without any log output, just like cy8ckit_062_wifi_bt_m0 boards.

Jason, I have Zephyr running with cy8ckit_062_ble_m0. I would ask you to review board configs. Compare cy8ckit_062_wifi_bt_m0 with cy8ckit_062_ble_m0. Regards, Gerson Em ter., 21 de dez. de 2021 às

I do not have the PSoC6 WiFi-BT Pioneer Kit board but I introduced the PSoC6 BLE Pioneer Kit and made all improvements using that board, which is the same SoC. What example did you use? Em ter., 21 de

Hi I want to add some more comments. I use the zephyr example with PSoC6 WiFi-BT Pioneer Kit. It has built successful and flash .elf file to boards. It seems that

Hi Gerson Thank you for replying me. My board is PSoC6 WiFi-BT Pioneer Kit, Exactly the same as the boards on the Zephyr website. The link I refer to is

Hi Jason, Are you using P13-0, P13-1 ? See below: The PSoC-6 has a weird connection with an onboard psoc programmer. It uses the same pins from the Arduino UART Connector. To enable shields, uart was

Hi all I have downloaded the zephyr project completely, I plan to use the cy8ckit_062_wifi_bt_m0 board, I have built successfully, there is no error, but there is no log output in the

Hi, is there an option to run SPI on zephyr driver with MOSI with option Active_Low? I would really appreciate your answer. Best regards, Dominika Sułot

Howdy y'all, I am working on bringing up some of the features on the Laird BT610 board. I've been able to bring up the digital and magnetic sensors. However, I'm a bit confused with the analog and

Hi, I’m developing a broadcast audio application with the nRF5340 SoC, based on the iso_broadcast and iso_receive sample. At the moment, I can connect the broadcaster with multiple receivers

Any consideration in upstreaming the C++ versions of the semaphores and mutexs?

Hi Per-Erik, There's an on-going change in mcuboot to support extended write sizes: https://github.com/mcu-tools/mcuboot/pull/1217 This should help in the support of H7 and I guess you should start

I think you are missing CONFIG_LIB_CPLUSPLUS=y When it comes to threads (and semaphores, mutex etc) the Zephyr implementation is lacking a bit, but except from that it is working fine. We have made

Yes, it works with: ``` CONFIG_NEWLIB_LIBC=y CONFIG_CPLUSPLUS=y CONFIG_STD_CPP20=y CONFIG_LIB_CPLUSPLUS=y ``` Thanks a lot for the pointers! Regards, Guy -- bytes at work Technoparkstrasse