users@lists.zephyrproject.org

Re: Segger RTT support

Hi Marcio, Can you try adding: CONFIG_UART_CONSOLE=n to your prj.conf? More info here: http://docs.zephyrproject.org/tools/nordic_segger.html#rtt-console Regards, Carles

By Carles Cufi · #872 ·

Segger RTT support

Hi all, I am trying to setup my nrf51 project to use Segger RTT console.I am compiling last version of Zephyr but any previous version can be used. My nrf51 hardware is ok and I can use RTT on Keil

By Marcio Montenegro · #871 ·

Re: [Zephyr-devel] #BluetoothMesh Lighting Model implementation #bluetoothmesh

Hi, MyNewt's is a good start point. But looks need more work to make zephyr bluetooth mesh be used in light. I am looking forward it. In the mean time, I can start sensor model coding on zephyr when

By Aaron Xu <overheat1984@...> · #870 ·

Re: [Zephyr-devel] #BluetoothMesh Lighting Model implementation #bluetoothmesh

Hi Johan, Mynewt's lighting model app is very simple & basic, if compare it with diagram on page 296 of model specs. And it is not what I'm expecting. Hello Bluetooth_SIG members, Is Bluetooth_SIG

By vikrant8051 <vikrant8051@...> · #869 ·

Re: [Zephyr-devel] #BluetoothMesh Lighting Model implementation #bluetoothmesh

Hi Vikrant, MyNewt's Bluetooth Mesh is essentially the same as Zephyr's mesh, since it was ported from Zephyr. Most likely you can take any model implementation from there and use it directly (or

By Johan Hedberg · #868 ·

#BluetoothMesh Lighting Model implementation #bluetoothmesh

Hi to all, is there any one who tried to implement Lighting Models (page 296 of Mesh_Model_Specification v1.0.pdf) using Zephyt #BluetoothMesh API ? I want to control three things -> Light On Off,

By vikrant8051 <vikrant8051@...> · #867 ·

Re: [Zephyr-devel] How to implement #BluetoothMesh Generic_Delta_Server_Unack opcode function ?? #bluetoothmesh

Hi to all, I solved my own issue. Please refer this ... https://github.com/vikrant8051/zephyr/blob/mesh_demo/samples/boards/nrf52/mesh/onoff_level_app/src/mesh/doer.c Thank You !!

By vikrant8051 <vikrant8051@...> · #866 ·

Re: First Mac build

Hi Jim, and welcome. Looking at the URL, those are instructions for the v1.11 release of Zephyr, which did indeed have some host tools in the scripts directory that needed to be compiled. As a guess,

By Marti Bolivar · #865 ·

First Mac build

Hi all, I’m getting started with first build of Zephyr on my Mac. I don’t get very far – after clone there are the following instructions: Build Kconfig in $ZEPHYR_BASE/build and add it

By Jim Schmidt <JimS14@...> · #864 ·

Re: [Zephyr-devel] How to implement #BluetoothMesh Generic_Delta_Server_Unack opcode function ?? #bluetoothmesh

Hi, I forgot to mentioned about struct server_state *state_ptr = model->user_data; ---------------------------------------------------------------------------------------- struct server_state

By vikrant8051 <vikrant8051@...> · #863 ·

How to implement #BluetoothMesh Generic_Delta_Server_Unack opcode function ?? #bluetoothmesh

Hi, Hi to all, I am trying to implement Generic_Delta_Server_Unack (Level Server) as follow ... void gen_delta_set(struct bt_mesh_model *model, struct bt_mesh_msg_ctx *ctx, struct net_buf_simple

By vikrant8051 <vikrant8051@...> · #862 ·

Zephyr news, 5 June 2018

Hello, This is the 5 June 2018 newsletter tracking the latest Zephyr development merged into the mainline tree on GitHub. An HTML version is available

By Marti Bolivar · #861 ·

Re: [Zephyr-devel] How to change Bluetooth default TX power ?

I'd second that vote as our use case also involves being able to change the tx power depending on the type of advertisement packet being sent out. -- Gurpreet SinghMember of Technical StaffMist

By Gurpreet Singh <gurpreet@...> · #860 ·

Re: [Zephyr-devel] How to change Bluetooth default TX power ?

Hi, https://github.com/zephyrproject-rtos/zephyr/pull/8164 Ryan, As stated in my earlier email, runtime changes need Host API and corresponding vendor HCI extensions, let alone controller

By Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...> · #859 ·

Re: [Zephyr-devel] How to change Bluetooth default TX power ?

Hi Vinayak, My current need is to be able to change the power setting through a config variable, as I have done outside the zephyr system. I am investigating power-range compromises

By Abderrezak Mekkaoui <ab.mekka@...> · #858 ·

Re: [Zephyr-devel] How to change Bluetooth default TX power ?

I'd like to put in a vote for changing the TX power at runtime. Our use case would be making the TX power less during advertisements and then increasing it once the connection is

By Ryan Erickson <Ryan.Erickson@...> · #857 ·

Re: [Zephyr-devel] How to change Bluetooth default TX power ?

Hi Vinayak, My current need is to be able to change the power setting through a config variable, as I have done outside the zephyr system. I am investigating power-range compromises

By Abderrezak Mekkaoui <ab.mekka@...> · #856 ·

Re: [Zephyr-devel] How to change Bluetooth default TX power ?

Vikrant, Sure, I will send a PR for that one as soon as I can (tomorrow maybe). Regards, Vinayak

By Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...> · #855 ·

Re: [Zephyr-devel] How to change Bluetooth default TX power ?

Hi Vinayak, As of now, I need build time configuration option to change Tx power. It will be great, if we could do it by editing prj.conf. Thank You !!

By vikrant8051 <vikrant8051@...> · #854 ·

Re: [Zephyr-devel] How to change Bluetooth default TX power ?

Hi Vikrant and Abderrezak, Please elaborate on your applications' use case for Tx power change. Do you want to use a build time custom Tx power setting or runtime dynamic update to Tx Power? As there

By Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...> · #853 ·

Messages