users@lists.zephyrproject.org

Re: Zephyr in use with Arduino

Okay Thank you. so would it be better to take a Uart TTL Serial Camera? Is there a possibility to communicate with the camera without writing a driver? Von: Justin Watson <jwatson5@...> Gesendet:

By Kevin Stöckl <k_stoeckl@...> · #52 ·

Re: Zephyr in use with Arduino

The Arduino Due has USB host, but I don't think support will be added anytime soon for that. You will need USB host support to connect the webcam to the board. There is no easy connection to the

By Justin · #50 ·

Zephyr in use with Arduino

Hello, I am trying to make a security camera with zephyr and Arduino and therefore I had some Questions. 1. Which Arduino will be the best for this Application? "Due" or "101"? 2. How can I turn on

By Kevin Stöckl <k_stoeckl@...> · #49 ·

Re: [Zephyr-devel] I2C or SPI Driver Example for ARC (Sensor subsystem) for Quark_se

Be sure to also get the data sheet for the device attached to SPI or I2C. There are configurable options you must do correctly to communicate properly to the device on the other side.

By Chuck Jordan <Chuck.Jordan@...> · #48 ·

Re: [Zephyr-devel] I2C or SPI Driver Example for ARC (Sensor subsystem) for Quark_se

Have you looked at the gpio sample under samples/drivers/gpio? It’s just “GPIO_0”, and it depends whether the app is built for ARC or x86. For x86, it can be built with: $ make

By Dinh, Kien T <kien.t.dinh@...> · #47 ·

Re: [Zephyr-devel] I2C or SPI Driver Example for ARC (Sensor subsystem) for Quark_se

Hi Iam using zephyr 1.6.0 downloaded from the site If I need to toggle a simple GPIO on the Sensor subsystem, In the Kconfig file of the ARC Config options given are GPIO_QMSI , GPIO_QMSI_SS

By Mahendravarman Rajarao (RBEI/EAA10) <Mahendravarman.Rajarao@...> · #45 ·

Re: [Zephyr-devel] I2C or SPI Driver Example for ARC (Sensor subsystem) for Quark_se

Hi Mahendravarman, You might try to look at the samples folder in the repository. The below examples are using I2C and SPI on

By Dinh, Kien T <kien.t.dinh@...> · #46 ·

Re: [Zephyr-devel] I2C or SPI Driver Example for ARC (Sensor subsystem) for Quark_se

Hello, Although they are not specific to ARC, you can look over most of the sensor drivers (in drivers/sensor/) for use of I2C and SPI. Use of the I2C/SPI API is the same regardless of the platform,

By Bogdan Davidoaia · #44 ·

I2C or SPI Driver Example for ARC (Sensor subsystem) for Quark_se

Hi Team Do you have any sample/example of Using I2C or SPI driver of ARC ( sensor subsystem) in Quark_se ? Thanks

By Mahendravarman Rajarao (RBEI/EAA10) <Mahendravarman.Rajarao@...> · #43 ·

★ Leia suas mensagens antes que sejam deletadas

See this email in English, Deutsch, Français, Italiano, Español or 37 other languages

By Felipe Neves · #42 ·

I2C or SPI Driver Example for ARC (Sensor subsystem) for Quark_se

Hi Team Do you have any sample/example of Using I2C or SPI driver of ARC ( sensor subsystem) in Quark_se ? Thanks

By Mahendravarman Rajarao (RBEI/EAA10) <Mahendravarman.Rajarao@...> · #41 ·

★ Zephyr Users, Felipe te mandou uma mensagem

See this email in English, Deutsch, Français, Italiano, Español or 37 other languages. Felipe te mandou uma mensagem

By Felipe Neves · #40 ·

using Intel ISSM tolos to compile arduino_101_sss

Hi While having no issues using Intel ISSM toolkit on arduino_101, when I try to compile using arduino_101_sss as target, it complains that arc-elf32-gcc.exe: error: unrecognized argument in option

By Carles Perello · #39 ·

[net]Why not respond RS message

Hi all, I am development a Ipv6 project now, I have enable the CONFIG_NET_IPV6_ND. But when the connection establish between two note, the note doesn't processing the RS message. the log is like

By guiwu.guo <hfggw@...> · #38 ·

Re: Reg: Enable arc to access the spi controller on I/O fabric on C1000

You can, just be aware that there isn't any builtin mutual exclusion between the x86 and ARC cores in the OS, so if both cores are trying to access the same SPI controller, there will likely be

By Michael Rosen · #37 ·

Reg: Enable arc to access the spi controller on I/O fabric on C1000

Hi Please help me on the following queries I have downloaded zephyr 1.6 and I have applied the patchhttps://gerrit.zephyrproject.org/r/#/c/8708/ to Enable arc to access the spi controller on

By Mahendravarman Rajarao (RBEI/EAA10) <Mahendravarman.Rajarao@...> · #36 ·

Arduino 101 - pinmax of pins with multiple connections.

My project only needs two PWM outputs so I want to switch the two unused PWM to GPIOs. The best candidates are PWM 0 (IO 3) and PWM 1 (IO 5) however these are the pins that are connected to another

By Graham Stott <gbcstott1@...> · #35 ·

Re: Development Environment

Hi Keven, You would probably want to flash Zephyr onto the Due and then on the Linux host side, connected with a serial cable (UART) talk to the Due using python or something anything with a library

By Andersen, John <john.s.andersen@...> · #34 ·

Development Environment

Hello to all, I am new in using Zephyr, but i want to make a project with the arduino due and the Linux OS. So my Question is what Environment i should use for developing a project on Linux for the

By Kevin Stöckl <k_stoeckl@...> · #33 ·

Re: Zephyr BLE - use public(fixed) address

Hi Neha, Look at BLUETOOTH_INTERNAL_STORAGE: https://gerrit.zephyrproject.org/r/gitweb?p=zephyr.git;a=blob;f=subsys/bluetooth/host/Kconfig;h=b2e3775f4f07c5cf786de714e8bb1f6524589cd4;hb=HEAD There

By Luiz Augusto von Dentz · #32 ·

Messages