users@lists.zephyrproject.org

HCI SPI - how to use

Hello, I’ve found that Zephyr HCI stack supports SPI as transport and there is an implementation available https://docs.zephyrproject.org/latest/samples/bluetooth/hci_spi/README.html I’m

By Piotr Barszczewski <piotr@...> · #2683 ·

Re: Edge connectors and pin numbers

Hi, "Frank Duignan via lists.zephyrproject.org" <frank.duignan=gmail.com@...> writes: Yes, this is a GPIO nexus node. For details on these, see "2.5 Nexus Nodes and Specifier

By Bolivar, Marti · #2682 ·

Edge connectors and pin numbers

I'm working with the BBC Microbit V2 and can use the peripherals using the NRF port pin numbers etc. These port pins are brought to an edge connector which numbers them completely differently. There

By Frank Duignan · #2681 ·

Re: Problem running samples/sensor/sht3xd #driver #sensor

Hi again Ilkka, "ilkka.virtanen via lists.zephyrproject.org" <ilkka.virtanen=sensoan.com@...> writes: I'm glad; thanks! Yes, you can, you just need to make sure the

By Bolivar, Marti · #2680 ·

Re: Problem running samples/sensor/sht3xd #driver #sensor

Thank you Marti for the reply. The problem was indeed in the connection between the nRF52840DK and the external sensor. I watched your video, it was very good and informative. As I learned that the

By @Hidastelija · #2679 ·

Re: Problem running samples/sensor/sht3xd #driver #sensor

Hi, This email list is for upstream zephyr, not NCS, but since the sample is available in upstream zephyr I will respond here. "ilkka.virtanen via

By Bolivar, Marti · #2678 ·

Initialization and usage of device drivers in user code

Hello everyone, I'm pretty new to the Zephyr Project as we (our company) are evaluating it to use it as our base for the upcoming projects. It didn't take long to get our own application running on

By akrckn <alexander@...> · #2677 ·

Problem running samples/sensor/sht3xd #driver #sensor

Hi, I've tried to run the sht3xd sample using nRF52840DK, which is one of the boards with sample configuration overlay file, but all I get out in the logs is this: *** Booting Zephyr OS build

By @Hidastelija · #2676 ·

Re: nRF9160 custom board dynamic GPIO #nrf9160

"DKaplan via lists.zephyrproject.org" <DKaplan=amiglobal.com@...> writes: Hello! Since you're using NCS, if you haven't figured this out yet, I'd recommend asking on DevZone.

By Bolivar, Marti · #2675 ·

Defining preprocessor directives through #west

Hi everyone, I'm trying to automate the building of a set of LoRaWAN boards by using preprocessor directives to set their keys. Is it possible to define the directives using west? I was only able to

By Diogo Correia · #2674 ·

SDK 0.13.0 Release

Hi, Latest version of the SDK can be found here: https://github.com/zephyrproject-rtos/sdk-ng/releases/tag/v0.13.0 Please download and try things out and report any issues. • general: • Added

By Kumar Gala · #2673 ·

Networking Forum Agenda

Hi all, There is a networking forum tomorrow Tue 3 August at 8AM PST / 17.00 CEST. The current agenda is empty, please let me know if there are any topics you’d like to discuss. Otherwise,

By Lubos, Robert · #2672 ·

k_uptime_get values in QEMU

Hello, I am experiencing a problem and don't know how to solve it. Running k_uptime_get() returns the same value as k_uptime_ticks() and is a lot higher than the actual uptime in milliseconds. I did

By martin.schoenstedt@... · #2671 ·

Re: Esp32 flashing issue on Ubuntu 20.10

Hi, It could be as simple as you can not have a console connection and trying to flash as the USB is not good at handling two simultaneous connects. Happens to me all the time.

By William Fish · #2670 ·

Re: Esp32 flashing issue on Ubuntu 20.10

You need to be a member of the dialout group. For example sudo adduser pritam dialout Then logout and back in again

By Frank Duignan · #2669 ·

Esp32 flashing issue on Ubuntu 20.10

I am able to build code for esp32 but flash is being failed by denying permission on ttyUSB0. Any help would be appreciated.

By pritam sutar <pritamsutar660@...> · #2668 ·

nRF9160 custom board dynamic GPIO #nrf9160

Shalom! We have a nRF9160 custom board on which I cannot switch some of the IO lines. For example we have two leds, P0.9 an P0.10 but only P0.9 works. The hardware guy reports the P0.10 output

By David Kaplan · #2667 ·

Re: Compiler and linker warnings with GCC 11

Some of these issues might be resolved by: https://github.com/zephyrproject-rtos/zephyr/pull/35893 - k

By Kumar Gala · #2666 ·

Re: TF-M samples build

Marti Bolivar <marti.bolivar@...> writes: D'oh, I forgot to reply-all.

By Bolivar, Marti · #2665 ·

Re: Cmake Error While Building Blinky Sample

Have you setGNUARMEMB_TOOLCHAIN_PATH ? https://docs.zephyrproject.org/latest/getting_started/toolchain_3rd_party_x_compilers.html#gnu-arm-embedded Also, have you tried cleaning your build/

By Carles Cufi · #2664 ·

Messages