Hello, I’m building a battery powered IoT device based on an nRF52832, with a small sensor (i2c) and a LoRa transceiver (sx126x). The device measures and sends the measured value every 12 hours and

Hi all, Agenda for today, taken from the Triage column in the project. - We need a proposal for the API and component naming conventions: - Issue:

Hi Isn't `ninja menuconfig` what you are looking after? Link : https://docs.zephyrproject.org/latest/guides/kconfig/menuconfig.html?highlight=menuconfig . Regards

Guys any extra information about this. It will really helps. Thank you On 12/1/21 4:23 μ.μ., Nikos Karamolegkos wrote: -- Nikos KaramolegkosR & D engineer at

Hello, I am using a third party chriptographic engine that provides a dedicated hardware accelerator for AES-128 encryption based algorithms. I am using this engine to encrypt and decrypt the data

Hi. > **Creating an Embedded Border-Router for Thread** Currently there is support for the NCP as well as the RCP configuration of an OpenThread BR within Zephyr

Hi, I am currently investigating Zephyr and Thread for various use cases and I did a lot of research, but there are still a lot of open questions left. I tried to avoid opening an issue, but I am

Hi Michael, When available, peripheral drivers of one SoC series should work with all boards using SoC of this series. Peripheral configuration is not done systematically on all the boards, as it

Dear all, I am new to Zephyr, I would like to use it on a STM32 for a Ethernet-to-CAN converter. While looking on the list of supported boards, and the supported feature, I can not find a single STM32

Hello. I'm newbie with Zephyr OS. I've started with 2.4.99 version I would like to connect mx35 2 Gb Nand flash to stm32f413 microcontroller via spi. I've found spi_nor driver in zephyr/drivers/flash

I have an application for the nrf52840dk_nrf52840 board where I am using printf() to print some messages. All works most of the time and the messages are shown correctly on my serial console. However,

Hello and Happy new year to everyone, I am working in project with target to use zephyr as base of any freestanding application. Specifically, I would like the developer to have the ability to choose

- drivers: pwm: add functions for capturing pwm pulse width and period - PR: https://github.com/zephyrproject-rtos/zephyr/pull/26025 - Naming conventions - PR:

Hi Uwe, Looking at the board device tree description, USB is actually supported on this board: &usb { status = "okay"; pinctrl-0 = <&usb_dm_pa11 &usb_dp_pa12>; }; I'll update the doc to reflect this

Hi Dave, I take it you mean the Freedom K64F board? It is correct that the SD card controller of the K64F is not yet supported by Zephyr. There is an open issue regarding this:

Hi Uwe, The nRF52840 and the nRF5340 ICs from Nordic support both USB and Bluetooth. There are several boards based on those supported by Zephyr. Carles

Hello, I am looking for a chip/ board that has Bluetooth AND USB which is supported by Zephyr. For example, the STM32WB55RG offers USB and Bluetooth, but it looks as if Zephyr does NOT support the

Hi, "Steven Ghekiere via lists.zephyrproject.org" <steven.ghekiere=student.kuleuven.be@...> writes: The location of the zephyr repository is available to CMake in the ZEPHYR_BASE

​Hi! I'm developing a project with both a central device and end devices. Since both projects use a lot of the same functions I've used, it would be beneficial if they could use the same files. The

Hi Steven, Your PRs do not modify existing APIs or add any new ones, from what I can tell after a quick look. You can either wait for reviews, or bring those up at the dev-review meeting on