My environment: Ubuntu 18.04 LTS STM32L476 Nucleo_64 (hereafter STM32L476) STM32F769 Discovery Kit (hereafter STM32F769) Zephyr 2.1.0-rc1 ### SPI2 for STM32L476

Good day, I have decided to dive head first into Zephyr with a project of mine. I have a LIS2DH and a W25Q128JV Flash on the same SPI bus, with two GPIOs to control the chip selects. I have a

Please follow this, if using hci_uart: https://devzone.nordicsemi.com/nordic/nordic-blog/b/blog/posts/nrf5x-support-within-the-zephyr-project-rtos Else if using hci_usb and the nRF52840’s

I have build and flashed the zephire/sample/bluetooth/hci_uart on nrf52840 board and connected the board with ubuntu but hci interface was not created when checked using hciconfig. Can you please

I am attempting to create a simple SPI-Slave implementation for the nRF52 PCA10040 board. My project’s source code is at https://github.com/foldedtoad/spi_slave. While I am able to receive

Hi all, This week we will focus on two Stable API Change RFCs and GPIO. I am unable to attend but Peter Bigot has kindly offered to chair the meeting instead. Reminder on the Stable API Change RFCs:

Hello Zephyr users, Now that Zephyr 2.1 has been released, I am proposing we make Python 3.6 the minimum supported Python version for

Hi Pauli, If you are able to do what you want with Cube HAL then, to interface with zephyr, you just need to redefine the HAL callback (defined as weak in HAL drivr) in your zephyr application. You

Dear all, I am doing silly motor driver for worm-gear dc-motor with stm32f411e-disco board (and L298). The dc-motor has HAL-sensor for feedback - providing raising/lowering edge for every turn. Now,

Hi all, This week we will focus on API Changes and GPIO: - Changing a stable API: - https://github.com/zephyrproject-rtos/zephyr/pull/21013 - GPIO: Update on progress - Look at the PRs with

Hi, Iam using nrf52840 DK as a BLE controller. So i compiled a hex file and loaded into it. There after when we power on am getting the bdaddr of the device as 00:00:00:00:00:00, But when i check

I just realized I responded to you privately by accident, Lawrence. Sorry about that. I will copy the message I sent to you to the group so that the discussion is up to date. The suggestion regarding

Adding devel@... to the email address. Lawrence King Principal Developer +1(416)627-7302

Hi Brian: You can always test the value of the GPIO with gpio_pin_read() in the callback, if it is 1, then the cause is a rising edge, and if it is 0 the cause was a falling edge. Unfortunately if

Dear All: I have a similar problem to what Frank Viren is seeing in his thread “bt_gatt_notify multiple characteristics”. How to determine the pointer to the right characteristic. When my

Hello, I hope I am posting this question in the correct place. I have an interrupt handler which can be configured to trigger on either edge. This is working perfectly, but I want to perform a

I have downloaded the Arduino IDE and that includes a version of BOSSAC that may be useful. That may be a quickest method to find a working replacement version. My interest in the use of bossac comes

I have checked old SDKs. SDK v0.9.2 (20 Oct 2017): no "-o" option for bossac. SDK v0.9.1 (20 May 2017): no "-o" option for bossac. The "-o" for bossac.py is added on 9 Jul 2018

Hi Yas, "yasokada via Lists.Zephyrproject.Org" <yasokada=gmail.com@...> writes: Correct -- where the binary in question is the one provided with the SDK. It may be unmaintained.

Dear Marti Thank you very much for taking your time for this. From your information, it seems the bossac has "-o" options in source code, but does not have in binary execution code. > I would try