Hi Guys, Does someone has info about limitations on running a modbus RTU client inside a work? I have a function that is calling modbus_read_input_regs, if executed in the main no problem at all, the

Zephyr USB Host support is currently in so early stage that expecting it to support 4G module anytime soon is unrealistic. There is no class support at all in the USB host stack and the only host driv

Hi, I have this m4-side (Zephyr 3.39) project in github: https://github.com/neuberfran/pico_pi_m4 Device tree from Yocto Hardknott (A7-Side) files: https://gist.github.com/neuberfran/64d3b164f43bdc752

I had a similar problem the root cause is folder permissions. For some bazaar reason west checked the access rights of the initial folder and none of the others.

Hi Nabil, Yes, it is certainly possible to keep your in-house BLE stack in Zephyr. You will likely need to make changes to your stack in order to adapt it to the Zephyr threading an interrupt model, b

Dear, How to fix this error? When I try to update it response this message === updating bsim (tools/bsim): fatal: 908ffde6298a937c6549dbfa843a62caab26bfc5^commit: not a valid SHA1 FATAL ERROR: command

Dear Support, I am starting a feasibility study to analyze the replacement of our existing RTOS on our BLE device with Zephyr RTOS. WE have our in house BLE stack (host & Controller) and would like to

Classification: Internal Dear All, We are planning to use 4G module with USB interface. Wanted to check if we have support for USB host stack to integrate the 4G modem driver. I read as of now zephyr

Classification: Confidential Dear All, We are planning to use 4G module with USB interface. Wanted to check if we have support for USB host stack to integrate the 4G modem driver. I read as of now zep

Hi, I'm running the samples/hello_world program which is doing a printk("Hello World"). I built and flashed the program on my LPC ARM board using the instructions provided here: https://docs.zephyrpro

Hi everyone, I have a problem with the ADXL372 sensor. The same source that runs fine on ncs 2.0.0 (nordic board, thingy91) does not work on ncs 2.2.0; I can't find where the problem could be attribut

#sensor

Hi, You might have better luck asking in the #nxp channel on Discord. https://chat.zephyrproject.org/ Benjamin.

#api #ethernet

I apologize if this has been asked before, but I didn't seem to find this question. On the MIMXRT1170-EVK evaluation board, there is a 1G Ethernet port (J4), on the same side as a 10/100 Ethernet port

#api #ethernet

Hi, Zephyr SDK 0.16.0 has been released: https://github.com/zephyrproject-rtos/sdk-ng/releases/tag/v0.16.0 The following changes have been made in this release: - general: * Changed the distribution b

Hi, I'm running a stm32 board and I want to use 2 PWMs and 1 qenc on the same timer. But I can't figure out how that is setup properly in the DTS. Below is what I got at the moment. It builds without

#dts

Hello, I'm announcing west v1.0.0. Release links: - PyPI: https://pypi.org/project/west/1.0.0/ - GitHub: https://github.com/zephyrproject-rtos/west/releases/tag/v1.0.0 - Release notes: https://docs.ze

Hi Jyothi, Are you confident your environment is up-to-date w.r.t 3.2? You may want to run west update. (see https://github.com/zephyrproject-rtos/zephyr/issues/42147) Benjamin --

Greetings! I am trying to compile "hts221 driver" in 3.2 version of Zephyr , while compiling i am getting "hts221_reg.h" file is not found Previously, in 2.5 version this driver used to compile succes

I deleted the second mount but it seems I corrupted the flash and still does a stack overflow. I stubbed formatting in littlefs_fs.c but it failed. I am using an nRF52832 module and Micron 16Mbit part

#customboard #nrf52832 #spi #sys_init

After compile sample, west build -b esp32s2_saola samples/sensor/esp32_temp_sensor it will create include/generated/sensor.h with detailed definition of sensor_sample_fetch(). See attached ---henry