Hi Team, Following is my requirement, please go through and please suggest a possible method for me. I had PCA10056(NRF52840) board with me. It will be having a default IPV4 address when the device ge

#nrf52840

Thank you Jukka for your reply. I think I will stay with the nrf52840 dk. If there is no other suggestion

#nrf52840

Hi Nikos, Don't know about exact boards, but currently we have 802.15.4 drivers for following chips/shields in drivers/ieee802154 source "drivers/ieee802154/Kconfig.cc2520" source "drivers/ieee802154/

#nrf52840

Hello to everyone, in this link1 there is a list with all the modules supported by zephyr. I am interested in 802.15.4 modules that are fully supported by Zephyr's kernel. Based on this discussion and

#nrf52840

Good afternoon, I'm a zephyr newbie, trying to implement it into an IoT project! I'm aware that there is already a driver for the MX25 flash memory device in the nrf's dev kit, but I wasn't able to im

#flash #nrf52840 #spi

Hi there, Most of the questions you ask are covered in the DT documentation: https://docs.zephyrproject.org/latest/guides/dts/index.html# The macros are generated by a Python script at build time, see

#dts #eclipse #nrf52840

Good morning! I'm a total newbie to Zephyr, learning the basics to implement in a project for an IoT sensor, more specifically IIoT(Industrial IoT). The module I'm using is a NINAB302, which incorpora

#dts #eclipse #nrf52840

Hi, Are these messages from a C++ compiler? If yes trying casting. Marc From: <users@...> on behalf of "giriprasad@..." <giriprasad@...> Date: Wednesday, 4

#nrf52840

When Iam trying to include flash.h file in my application noticed below compilation error. Can you help me to resolve the issue ZEPHYR/zephyrproject/zephyr/include/drivers/flash.h: In function 'int z_

#nrf52840

I believe I made some progress after including "myRepo" as a submodule, however now I am running into this: Including module: in path: /home/stan/projects/projectRed/myRepo CMake Error at /home/stan/p

#nrf52840

Hi all, I'm working on a custom product based on the nRF9160 and am trying to setup our version control repo outside of the Zephyr (or in this case the Nordic SDK). Currently I have the following dire

#nrf52840

Not supported yet. And, there has been no deadline set or plan in progress towards its completion, yet. Best said, it will be supported when there is a strong requirement and resources assigned (or th

#ble #nrf52840

Hi Vinayak, When you say " Long range is not supported in advertising", does it mean " Long range **will never be** supported in advertising" or " Long range is not supported in advertising **yet**" ?

#ble #nrf52840

Long range is not supported in advertising (Extended Advertising feature is not supported), hence long range connection too cannot be established. After legacy connection is established Bluetooth Host

#ble #nrf52840

Hello, I am new to Zephyr. I tried some samples with the nordic sdk and was able to use Nordic UART Services (NUS) as central and peripheral with coded phy (S=8). With nordic (S=2) is not possible. So

#ble #nrf52840

Alright, I fixed that issue by splitting the predefined flash storage partition (storage_partition) in the board's dts in half. Leaving the name of the first one as is and naming the second one storag

#nrf52840

I found out that NVS seems to interfere with the settings fcb. I'm using that for the bt settings (pairing keys, etc.). Is there any way to use the settings fcb and NVS concurrently?

#nrf52840

Hi, in my application, I want to apply a reboot via sys_reboot(SYS_REBOOT_WARM) directly after writing a specific value to NVS via nvs_write() to cleanly reinitialize the system with that value in NVS

#nrf52840

Hi, I am trying to interface ENC28J60 module to PCA10056(NRF52840). Below are my pin configurations: ================= =================================== NRF52840 PCA10056 ENC28J60 (pin numbers on th

#nrf52840 #spi

Fixed by using mcuboot master. v1.3.0 is not compatible with Zephyr v1.14.0.

#nrf52840