Hi Garret, Unfortunately no, BT is not enabled on this platform. Actually the bluetooth application processor (BlueNRG-M2) is not ported in Zephyr yet. This might not be a major work as it would consi

#bluetooth #stm32 #hci

I believe I have found a bug in the current HCI-USB code for the nRF52 series when it is started from the MCUboot bootloader. This is on the current Zephyr 2.6 branch. In usb_dc_nrfx.c, usb_dc_attach(

#hci #mcuboot #nrf52

With a 5.10.11 linux kernel and bluez-5.55, setting PHY in btmgmt still doesn't work due to a bug in the kernel. You can easily work around that by using hcitool: # set default phy to encoded hcitool

#ble #nrf52840 #uart #hci

Hi, I am trying to figure out how to make a HCI USB Bluetooth host adapter with device management on a nRF52840 Dongle. My approach is to make a USB composite device consisting of the Bluetooth device

#nrf52480 #mcumgr #hci #usb

Hi, Zephyr open source controller does not support long range. The feature is under development by our contributors. The missing supported commands may be a bug, but on quick review I could find them

#ble #hci #usb

@Josh Can you give some insight, how you requested Data Length Extension? I can not find any documentation how to do this. I was able to enable to do it manually through the nRF Connect Tool, but need

#nrf52840 #ble #hci

1. Overview 1.1. Hardware - nRF52840 DK (PC10056) - nRF52840 Module (u-blox NINA-B302) 1.2. Software 1.2.1. nRF52840 DK - zephyr 1.9.2 - HCI_UART Example - nrf5.conf: o +CONFIG_BT_CTLR_TX_BUFFER_SIZE=

#ble #hci #uart #nrf52840

Hi Oliver, If I understand correctly, you want to run Zephyr OS on Cypress BLE chips, but do not want to use the fully open source BLE stack in Zephyr OS. You will need to start with adding your SoC a

#ble #hci