DTS/Binding Issue migrating from 2.0.0 to 2.1.0 #nrf52832
Hello Zephyr Users,
I have inherited a Zephyr project using nRF52832 from another developer and am having an issue migrating from 2.0.0 to 2.1.0. Its probably something simple but I'm fairly new to the devicetree system and can't seem to wrap my head around whats wrong here.
In my custom board .dts file I have the following i2c configuration (note that the lis3dh is a zephyr-supported sensor driver and I have custom drivers/bindings for tca6507 and mcp47cvb12):
Using OS v2.0.0 this built properly. After upgrading the OS to v2.1.0, I get the following error from `zephyr/scripts/dts/extract_dts_includes.py` on build:
Exception: /soc/i2c@40003000/lis3dh@19 defines parent /soc/i2c@40003000 as bus master, but /soc/i2c@40003000 is not configured as bus master in bindingBy changing `compatible = "st,lis2dh", "st,lis3dh";` to `compatible = "st,lis2dh-i2c", "st,lis3dh-i2c";` in the .dts file this gets rid of the error for the lis3dh, but i get a similar error for `mcp47cvb12` and `tca6507`. For completeness, here are my .yaml files for these two bindings:
Alright so onto direct questions: