[Zephyr-devel] Firmware over the air (FOTA) and FCB support in 1.11.0

vikrant8051 <vikrant8051@...>


I integrated my Nordic Blinky (which toggles LED1) into SMP_SVR example & flashed it along with mcuboot.

Then re-edit SMP_SVR to toggle LED4, & flashed this firmware using #FOTA feature.

So it is working for me !!

Thank to all !!

On Sun, Apr 8, 2018 at 12:27 AM, Marti Bolivar <marti@...> wrote:
Hi Carles, Ashish,

On Sat, Apr 7, 2018, 12:56 AM ashish shukla <ashish.shukla@...> wrote:
Hi Carles, 

Following the documentation provided : 

Step1 : Build MCUboot 
Step2: Flash MCUboot 

what I understand is these files reside in /zephyr/subsys/dfu, 

This is the problem.

Ashish, mcuboot is not part of Zephyr. It is an independent project. You need to build it using the instructions Carles gave you later in the thread.

The dfu subsystem contains zephyr-specific code for interfacing with mcuboot from the chain-loaded zephyr image. It is not a standalone application.


ashish shukla <ashish.shukla@...>

Hi Marti,

Thanks for pointing out the source of the problem, it's working for now.

Also, with help of detailed documentation, I was able to implement FOTA feature.

Warm regards,
Ashish Shukla
Jr. Embedded Engineer
Research & Development

Please consider the environment before printing this e-mail or its attachments.

Disclaimer: The information contained herein (including any accompanying documents) is confidential and is intended solely for the addressee(s). If you have erroneously received this message, please immediately delete it and notify the sender. Also, if you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or taking any action in reliance on the contents of this message or any accompanying document is strictly prohibited and is unlawful. The organization is not responsible for any damage caused by a virus or alteration of the e-mail by a third party or otherwise. The contents of this message may not necessarily represent the views or policies of Corvi