Hello, Based on md5sum, that's the same file as had been announced a week before. So, people who downloaded it may check their md5 and save some traffic. -- Best Regards, Paul Linaro.org | Open source

Dear community, I am developing for D2000 with Zephyr and I currently need to be able to write to the UART B and to monitor it. However, I cannot manage to do it. For writing to the UAR I am using the

Hi, I've faced an issue when trying to debug using zephyr openocd ("make BOARD=... debug"). Problem happens in step by step debug where I suddenly jump in an unrelated function. I don't face such beha

Hi Just wondering if anybody used the PM technology with zephyr. There is code for the arduino IDE but I don't know how difficult would be to port it regards

I was testing out building the v1.6.0 kernel using SDK v0.9 for BOARD=arduino_101 and it failed. I was able to build it using the SDK v0.8.2, but it failed to flash via openOCD. I´m using Ubuntu 16.04

Hi there! I'm new to Zephyr. I was looking for gdb python scripts that add commands/shortcuts to gdb to do helpful things like dump memory pool blocks, print out status of sync primitives, etc. Does s

Hi all I am new to this mailing list. I connect my arduino 101 to minicom, I have set the serial port: ttyUSB0 8N1 I use the Adafruit 4 pin cable (PL2303) black Ground connect GND on arduino 101 green

Hi all I am new to this mailing list. I connect my arduino 101 to minicom, I have set the serial port: ttyUSB0 8N1 I use the Adafruit 4 pin cable (PL2303) black Ground connect GND on arduino 101 green

Hi all, I am use bluetooth function in NRF52_PCA10040 board, I get a issue that when a central get a connect fail after I call bt_conn_create_le function, it didn’t get any call back. I do know the co

Hello, Can Zephyr allow us to use the HW MAC address of the BLE module while advertising? I am working on the BLE sample codes in Zephyr 1.6, and noticed that while running the Zephyr BLE peripheral_h

Hello to all, I am new in using Zephyr, but i want to make a project with the arduino due and the Linux OS. So my Question is what Environment i should use for developing a project on Linux for the Ar

My project only needs two PWM outputs so I want to switch the two unused PWM to GPIOs. The best candidates are PWM 0 (IO 3) and PWM 1 (IO 5) however these are the pins that are connected to another ou

Hi Please help me on the following queries I have downloaded zephyr 1.6 and I have applied the patch https://gerrit.zephyrproject.org/r/#/c/8708/ to Enable arc to access the spi controller on I/O fabr

Hi all, I am development a Ipv6 project now, I have enable the CONFIG_NET_IPV6_ND. But when the connection establish between two note, the note doesn't processing the RS message. the log is like this:

Hi While having no issues using Intel ISSM toolkit on arduino_101, when I try to compile using arduino_101_sss as target, it complains that arc-elf32-gcc.exe: error: unrecognized argument in option '-

Zephyr Users, Felipe te mandou uma mensagem See this email in English, Deutsch, Français, Italiano, Español or 37 other languages. Felipe te mandou uma mensagem Responda agora mesmo! Experimente o ser

Hi Team Do you have any sample/example of Using I2C or SPI driver of ARC ( sensor subsystem) in Quark_se ? Thanks

Leia suas mensagens antes que sejam deletadas See this email in English, Deutsch, Français, Italiano, Español or 37 other languages Felipe te enviou uma mensagem Você ainda não leu a mensagem enviada

Hi Team Do you have any sample/example of Using I2C or SPI driver of ARC ( sensor subsystem) in Quark_se ? Thanks

Hi Mahendravarman, You might try to look at the samples folder in the repository. The below examples are using I2C and SPI on ARC: https://github.com/zephyrproject-rtos/zephyr/tree/master/samples/driv