Hi All, I'm trying to flash code, and boot out of the QSPI memory on the MIMXRT1050 EVKB board. Does anyone have experience with this? I've been unable to successfully flash so far. Here are the steps

New here just stumbled on Zephyr. I come from a PIC background and moved to STM32, loved it.... except the HAL framework... I like how everything is integrated in Zephyr and how easy it is to put to g

Hi Gerson Thank you for replying me. My board is PSoC6 WiFi-BT Pioneer Kit, Exactly the same as the boards on the Zephyr website. The link I refer to is https://docs.zephyrproject.org/latest/boards/ar

Hi Jason, Are you using P13-0, P13-1 ? See below: The PSoC-6 has a weird connection with an onboard psoc programmer. It uses the same pins from the Arduino UART Connector. To enable shields, uart was

Hi all I have downloaded the zephyr project completely, I plan to use the cy8ckit_062_wifi_bt_m0 board, I have built successfully, there is no error, but there is no log output in the corresponding de

Hi, is there an option to run SPI on zephyr driver with MOSI with option Active_Low? I would really appreciate your answer. Best regards, Dominika Sułot

Howdy y'all, I am working on bringing up some of the features on the Laird BT610 board. I've been able to bring up the digital and magnetic sensors. However, I'm a bit confused with the analog and tem

Hi, I’m developing a broadcast audio application with the nRF5340 SoC, based on the iso_broadcast and iso_receive sample. At the moment, I can connect the broadcaster with multiple receivers and trans

Hi Zephyr users! I'm new to Zephyr and was asked to write a small "study" project in c++. I didn't find much in the documentation about c++, except one sample and the following page: https://docs.zeph

In our project we are using the microcontroller STM32H753. We are trying to use mcuboot with the sample smp_svr (overlay-udp.conf) for software updates over Ethernet. This has been working good for th

I am trying to get my code to build with C++ exceptions enabled. Here are my configurations: CONFIG_CPLUSPLUS=y CONFIG_NEWLIB_LIBC=y CONFIG_LIB_CPLUSPLUS=y CONFIG_MINIMAL_LIBC=n CONFIG_NEWLIB_LIBC_NAN

Hi All, We're trying to turn on debug optimizations, with C++ support. We have the following settings in our prj.conf: CONFIG_DEBUG_OPTIMIZATIONS=y CONFIG_NO_OPTIMIZATIONS=y but this leads to an undef

Hi, is there a way to support out of tree arch build like SOC or board? Any advise is appreciated. Sheng

Hi there, I was using the Zephyr 2.6 branch, and I got the gsm_sample to work for my application. I was using the nrf5340dk_nrf5340_cpuapp with a U-blox R211 gsm modem. However, when I updated to Zeph

Hello, I'm using the Zephyr RTOS on a STM32F091 and have recently started working on implementing some low-power states (sleep and STOP). The system is fed by the PLL (48MHz) which is in turn fed by a

I'm in the process of adding device firmware upgrade support for the mimxrt1050_evk using the hyperflash. To use the flash_img api I had to make the following change: --- a/dts/bindings/mtd/nxp,imx-fl

This is my first time trying to add support for a board and using Zephyr RTOS, so any help would be appreciated: I believe Zephyr RTOS already has support for my architecture (ARM), CPU core (Arm Cort

Dear Sirs, can anyone point me to some docs to read, some code examples or some tutorial about CoAP observer? Starting from CoAP client example, I'm stuck in a point where I, from a client, can ask to

Hello Zephyr team I am a software engineer of ITR VN company in Viet Nam country. Our develop team is well using Zephyr OS in our current project, but there are some unclear things related to NVS libr

A Zephyr RTOS & Espressif ESP32 SOC Development Environment: Linux setup script and tutorial. git clone https://github.com/Burtrum/scripts-zephyr This single script installs ALL of the tools needed to