This is not currently possible. You are welcome to send a pull request adding the feature.

Hi, I am trying to run Zephyr 802.15.4 samples in Renode for the NRF52840. On Renode I receive warnings that Renode does not implement the following 5 registers: NVMC:ICACHECNF EGU3:INTENSET EGU3:INTE

I'm thinking of using Teensey 4.1 with Zephyr. After I ordered a few Teensy, I found out there is no SWD or JTAG connection for my trusty Segger J-Link! Debugging is mentioned here: https://docs.zephy

Hello, see at : https://docs.zephyrproject.org/latest/hardware/peripherals/canbus/controller.html?highlight=socket+can#sending there is an inconsistency between the examples and the latest revision. T

Is there a way to pad the end of a Zephyr application so that the overall size of the image stored in internal flash is divisible by 8? I need this for post-process enciphering of the image.

Hi, I would like to use the Polling API. And, I would like to set up the array of k_poll_event objects as an iterable section, so that I can potentially scale it dynamically. The only hitch I can see

Hi all If I understand the STM32F74xxx specs right, a timer provides provides several independent channels for PWM output signal generation (e.g. TIM1/TIM8 6 channels each). My question is, how do I h

Hi All, I need to use the custom Jlink script file, after flashing and resetting the target using -JLinkScriptFile command in jlink. This custom script is needed for our application to start executing

Sure I will submit a ticket in GH and assign it to you. Yes I am trying to bring up an SMP system while the IPI support is not yet in place, which will be enabled soon. At the moment I am limited to u

Hi Andy, Thank you for replying. Sorry for the confusion. I incorrectly described the situation. In this case it is the ‘idle thread’ that was to be swapped out, and fails the ASSERT at https://github

I think I am able to reproduce what I see with mainstream Zephyr, and below is what I do: checkout HEAD of main (I was using dddb5dd6b0de9a8b8621b9ac695fd3fd980a33d6) disable SCHED_IPI_SUPPORTED in th

Hi Zephyr users, I recently looked into the Zephyr scheduler for an SMP application and see a case where: One core that runs an old thread (dummy in this case) and swaps to its idle thread. Soon it fa

Hi, I have this struct defined in a .h file: struct mystruct { struct device mydevice; struct k_sem semaphore; struct sys_snode_t snode; }; I have included slist.h thus: #include <sys/slist.h> I know

Hello, I ‘am currently working on a project, where an extern device (FPGA) is connected to a STM32H753ZI via a multiplexed FSMC interface. After some investigation I managed to setup my device tree al

hello, i am new to zephyr and i am looking into application development. I am trying to build an external library that is normally built with CMake. I have tried to use the external_lib https://github

Hi, I have recently started experimenting with Renode, and when I run the "echo_server" sample with "overlay-ot.conf", I get the following errors: "<err> net_otPlat_settings: Failed to store setting 1

Sorry if this is a newbies question... Backround: We normally do most development, testing, and regression testing on PC, not target. This is efficient given most of our issues are logic and not targe

Hi there, To my knowledge OpenCV does not support Zephyr. Looking at their ports folder it seems like they target full-blown operating systems, and not smaller RTOS like Zephyr: https://github.com/ope

Thank you Brett. Team, Please let us know OpenCV library support in Zephyr RTOS. Regards, Selvakumar

Hi, Zephyr SDK 0.15.0 has been released. https://github.com/zephyrproject-rtos/sdk-ng/releases/tag/v0.15.0 In this release, the GNU toolchain version has been updated: * Updated to Binutils 2.38 relea