Hello team, Greetings From Deepa. I need an manual installation procedure and building, compiling and Running the zephyr -OS with my laptop for learning purpose. I browsed and compiled via cmd prompt,

Hi all, Just a quick question - is driver from zephyr/drivers/sensor/bme280 also compatible with bmp180? I couldn't find definitive answer via search. Best regards, Karol

Hi, While trying to build the sample example blinky for the nRF5340pdk using west, I encountered this error. C:\zephyrproject\zephyr>west build -b nrf5340pdk_nrf5340_cpuapp samples\basic\blinky --pris

Hello, This is the first time I am posting on this forum asking you guys if you could help me figure out what is causing the installation of vcredist140 and python3 to fail. Please let me know if this

Hi to everyone: First post. I've a simple Zephyr RTOS program where I use USB CDC ACM to see the output of the console and also the printk output. Everything works fine, if I connect a terminal progra

Dear All, One of our devices installed on a remote location is under some sort of „denial-of-service“ attack - well, that‘s simply meaning someone is constantly connecting to our peripheral, thus bloc

The spi_flash_w25qxxdv driver has been superseded by the generic spi_nor driver for over a year. The only non-refactoring change to the W25Q driver in the last 18 months was done to support a backport

Hello there, I’m new to Zephyr and having some trouble with debugging my application with PyOCD and Eclipse. I’m running a multithreaded application on a nRF52840 DK. I flash and want to debug the app

Hi all, Agenda for today, sorry for the short notice. - Stable API change: All hid_ops callbacks get device pointer - https://github.com/zephyrproject-rtos/zephyr/pull/27619 - Add Regulator driver inf

I am trying to set the Bluetooth Low Energy DLE from 27 to something higher, eg. 251. I was able to do it manually through the nRF Connect Tool, Wireshark then confirms me that the data no longer is f

Software/Hardware: Board: NRF52840 PCA10056 programmed with Zephyr firmware Host Device: Linux Ubuntu 16.04.1 Bluez 5.48 Source code Bluetooth 5.0 Core Specification Problem: Attempting to use Bluetoo

Hello, Currently I am playing with TCP sockets on a board that has both an LTE-M modem, and an ethernet interface. It is not clear to me how I can control whether the socket should use the LTE-M conne

I have the HCI USB project built and running on my nRF52840 DK board. It works if I talk to it via ubuntu running under VirtualBox on my Win 10 system, but not if I plug it into a Raspberry Pi, or my

Hi all, I’m new to zephyr and need some help. I have a nrf52dk board and want to use this ( https://www.longan-labs.cc/1030001.html ) serial to CAN device. I was able to test this with an Arduino and

hi team I need to run the zephyr hello world project in my lap. please, tell me the steps. should update my OS to zeohyr from windows ? or Zephyr can be run with windows 10 itself, with supporting pac

Hi 🙂 I read some data from gps by uart and sometimes when I start my program it workA, but sometimes I get error form uart_err_check - "UART_ERROR_FRAMING = (1 << 2)". What could be the reason of it ?

I want to write some data in .csv file on SD card. Some of data are written , but then I get error : "CS control inhibited (no GPIO device)" I added this in config file: I havent got any idea what cou

Hi all, Agenda for tomorrow: - Extend LED API - PR: https://github.com/zephyrproject-rtos/zephyr/pull/26101 - [RFC] API change - Device structure attribute renaming - PR: https://github.com/zephyrproj

Hello there, I'm trying to connect my board (nrf52dk-nrf52832) to a development kit, through I2C, which has external pull up resistors. I would like to configure the I2C port to accept the external pu

Hi there, I've started using Zephyr OS last week, so is better to advise that there might be a tiny chance of this question being dumb. I'm trying to use the Nordic's nRF52832 RTC clock, so wrote a sm