Hi all, I am cancelling the API meeting today due to a conflict and the fact that there were no scheduled discussions to take place besides going over the current open GitHub issues to fix for 2.5. If

Hi all, There is a network forum meeting tomorrow Tue 2 Feb at 8AM PST / 17.00 CET. Currently the agenda is empty, so if there is anything network related topics you want to discuss, please let me kno

Hello, does anybody have working example of using LPCOMP in NRF52832 to wakeup MCU from sleep mode (when input voltage gets above setup voltage) and then read somewhere that it has been woken by LPCOM

Hi, We want to port our custom Bluetooth controller to run on Zephyr RTOS (not using the default zephyr ble controller support). I went through the Bluetooth documentation https://docs.zephyrproject.o

Hi all, Agenda for today: - Watchdog Example not working as expected on a Nordic chip Issue: https://github.com/zephyrproject-rtos/zephyr/issues/29991 - sensor: add TI FDC2X1X sensor driver and sample

Hi, Latest version of the SDK can be found here: https://github.com/zephyrproject-rtos/sdk-ng/releases/tag/v0.12.2 Please download and try things out and report any issues. [ I skipped the release ann

Hi all I'm developing a CANOPEN node based on an nRF52DK nRF52832 (PCA10040) board wired to a MCP2515 and a MCP2551 devices. So far, through a CAN Interface for USB plugged to a PC, I can receive and

Hi, I am using an STM32F4 board with an ENC28J60 (Ethernet over SPI chip) and am trying to get the net/sockets/http_get sample to work. To make it easier I use a static IP of google instead of DNS. Th

Hello, I’m building a battery powered IoT device based on an nRF52832, with a small sensor (i2c) and a LoRa transceiver (sx126x). The device measures and sends the measured value every 12 hours and st

Hi all, Agenda for today, taken from the Triage column in the project. - We need a proposal for the API and component naming conventions: - Issue: https://github.com/zephyrproject-rtos/zephyr/issues/2

Hello and Happy new year to everyone, I am working in project with target to use zephyr as base of any freestanding application. Specifically, I would like the developer to have the ability to choose

Hello, I am using a third party chriptographic engine that provides a dedicated hardware accelerator for AES-128 encryption based algorithms. I am using this engine to encrypt and decrypt the data tra

Hi, I am currently investigating Zephyr and Thread for various use cases and I did a lot of research, but there are still a lot of open questions left. I tried to avoid opening an issue, but I am quit

Dear all, I am new to Zephyr, I would like to use it on a STM32 for a Ethernet-to-CAN converter. While looking on the list of supported boards, and the supported feature, I can not find a single STM32

Hello. I'm newbie with Zephyr OS. I've started with 2.4.99 version I would like to connect mx35 2 Gb Nand flash to stm32f413 microcontroller via spi. I've found spi_nor driver in zephyr/drivers/flash

I have an application for the nrf52840dk_nrf52840 board where I am using printf() to print some messages. All works most of the time and the messages are shown correctly on my serial console. However,

- drivers: pwm: add functions for capturing pwm pulse width and period - PR: https://github.com/zephyrproject-rtos/zephyr/pull/26025 - Naming conventions - PR: https://github.com/zephyrproject-rtos/ze

Hello, I am looking for a chip/ board that has Bluetooth AND USB which is supported by Zephyr. For example, the STM32WB55RG offers USB and Bluetooth, but it looks as if Zephyr does NOT support the USB

Hello all, Zephyr newbie here, sorry if this is a simple question... I've used Freescale/NXP K64F for a number of successful projects using FreeRTOS. Considering using Zephyr because of driver/OS inte

​Hi! I'm developing a project with both a central device and end devices. Since both projects use a lot of the same functions I've used, it would be beneficial if they could use the same files. The st