Hi I had a question to setup the MCP2515 driver in the zephyr project. We made a custom board for the decawave DWM1001 module, which uses a nRF52832 chip. They have a device tree file in the zephyr pr

Dear all, I'd like to know if there is already a schedule about reaching PSE51 or PSE52 completeness (as far as I've understood, only subsets of such standards are currently implemented). Thanks. Clau

Hi all, This week we will look at: - PWM: Add support for inverted PWM signals - PR: https://github.com/zephyrproject-rtos/zephyr/pull/20657 - GPIO: Update on progress - Look at the PRs with driver co

Hello guys, for the board STM32F407 I want to add pin PA8 25 MHz clk output to Etherent Phy. So that I add the following sentence (1) HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1) into

Hi all, This week we will look at: - QSPI/jedec API proposal vs SPI API extension: - https://github.com/zephyrproject-rtos/zephyr/pull/20069 vs - https://github.com/zephyrproject-rtos/zephyr/pull/2056

Today I decided to bring up a STLML476 board, specifically the Nucleo-L476RG board. Compile went cleanly west build -b nucleo_l476rg samples/basic/blinky Then after connecting the board I tried west f

Hi, I have enjoyed the WebUSB sample application and it works nicely as expected. Is there a possibility to bind the Zephyr Shell to WebUSB? I saw that the webusb.c/.h files are in the samples directo

A reminder that the feature merge window to Zephyr will be closing this Friday (November 8th). For more information on milestone dates please refer to the program management wiki page: https://github.

Hi all, This week we will look at GPIO: - GPIO: Update on progress - Look at the PRs with driver conversion (https://github.com/zephyrproject-rtos/zephyr/issues/18530) - Check users of GPIO APIs: http

Is it compulsory to add the node "virtualcom" to configure a USB virtual com port via USB-OTG-HS for STM32F407 under Zephyr 2.0.99? I got the following code in DTS from a partner but it cannot be buil

Hello, I am trying to setup Eclipse with GNU MCU Eclipse plugin as an IDE debugger for Zephyr under Ubuntu 19.04. That is mainly in hopes to be able to debug with multiple threads, since I can't seem

A reminder that the feature merge window to Zephyr will be closing next Friday (November 8th). For more information on milestone dates please refer to the program management wiki page: https://github.

Hello I noticed here: https://www.youtube.com/watch?v=JaQhhCHLxxQ Nordic presented some of their implementations using the Logger framework which support features like: logger backend flash (saving lo

A reminder that the feature merge window to Zephyr will be closing on November 8th (two short weeks away). Please keep this date in mind for any items you may be working on that you wish to be include

Hi all, Wondering if SAME70 XPLD board has been tested with Ethernet Networking Samples in the repository. So far, all the examples that I have tried did not work for me. Wondering if I am missing som

Hi all, This week we will look at: - V4Z: Update on comments, merge if there is no objections - https://github.com/zephyrproject-rtos/zephyr/pull/17194 - EEPROM API proposal - https://github.com/zephy

Hi all, I'm trying to optimise the mcumgr SMP DFU transfer speed over Bluetooth LE. I'm getting speeds up to 5.12KibB/s (with different combinations of devices) but this Punchthrough blog post claims

Hi all, Optional property 'erase-block-size' is used to describe the minimum size of flash sector on which an erase operation could be applied. It is generated as a device tree generic define DT_FLASH

Hi Zephyr community, I am a little bit uncertain whether this is the correct list to ask for help; if not I would appreciate if you could guide me to the correct place :-) TLDR: (Current) main questio

A reminder that the feature merge window to Zephyr will be closing on November 8th (three short weeks away). Please keep this date in mind for any items you may be working on that you wish to be inclu