Hi all, Exactly as the subject line says, is it possible to configure the master clock frequency of an I2S peripheral in the device tree? I’m using an nRF5340. I can see that there’s a clock-source pr

Hello, I am trying to install zephyr on WSL Ubuntu (20.04.4), using this guide: https://docs.zephyrproject.org/latest/develop/getting_started/index.html I am able to get up to the command: pip3 instal

Hi, I'm planning to build a couple of libraries that will reside in ROM, and call them from a Zephyr application. The nature of these libraries is that I don't have control of their source code and th

Hello: I am having some troubles compiling my project. I want to support several boards and therefore I have a boards directory with a .conf file for each board in which I can punt the CONFIG* entries

Hi I installed zephyr on Mac with M1 silicon. I am trying to run zephyr with the ESP32 development kit. When I try running the command west build It gives the following error: [1/159] Generating inclu

Since there isn't any documentation about how to properly set-up a c++ application i'll ask here some questions about the topic. In issue #18990 it was pointed out the use of the kernel heap pool for

When I run the zephyr/samples/subsys/usb/mass example for board mimxrt1050_evk everything works fine except is only runs at normal USB Full speed 12M. I have tried to add "CONFIG_USB_DC_HAS_HS_SUPPORT

Hello, I am looking for a method to link prebuilt binaries so that they are included in my zephyr application binary file. These are not code libraries, they are actually just images of logos that get

Hi, For DFU using mcumgr over UDP we have a working configuration based on a version of the manifest-rev branch of mcuboot modified to support 32 byte alignment. Environment is Zephyr 3.0.0 running on

Dear Sir/ Madam, I am a PhD student from Indian Institute of Technology Goa. I am trying to implement a Cache Side Channel attack on Comet Risc V 32 bit processor. I have added the board architecture

Hi, I would like to develop and debug using Visual Studio (not Visual Code) under Windows 10. In other words, I would like to develop and debug with Visual Studio on the PC without the need of a board

Hello, I have successfully made a network connection using MODEM_GSM_PPP. Now, I would like to reduce power consumption by using power saving mode (PSM). What is the recommended way to send the AT com

Hi all, I read here: https://docs.zephyrproject.org/3.0.0/reference/kernel/other/cxx_support.html that Zephyr supports C++ applications, but that the kernel does not support the new and delete operato

(TSC Members/Alternates, Maintainers, Collaborators please follow link that were sent to you) Members of the Zephyr Community, We have assembled a Developer Survey to help us understand what is workin

Members of the Zephyr Community, The Zephyr Developer Summit is now less than a month away! Have you completed your registration yet? https://events.linuxfoundation.org/zephyr-developer-summit/registe

Hi, I originally posted this question to stackoverflow [^] so I think its better not to duplicate the whole story here. Supposing I have a DTS file with a content like this one below: n: detectors { c

Are there any API calls for retrieving thread and scheduler status? I'm looking for something that would indicate the following: Is the scheduler locked? What is the thread status? (Ready, Waiting, Su

Dear Team I am currently working on implementing Zephyr RTOS with Tensorflow lite on a custom board (RISC-V based). I am facing the few issues such as (i) Unable to avoid the use of standard C++ libra

Hi Zephyr users! I would like to profile my application and was wondering if there are tools available such as the famous ``perf``? I have found ``THREAD_ANALYZER`` that is very useful but I would nee

Hi, I'm wanting to design a firmware, for a small low-power embedded system, with an architecture that features a "bus" over which the firmware modules communicate. I'm wondering how to design this "b